Here is a list of parts needed to retrofit a NBT Navigation Unit in a E60. Please add to this if I am missing anything: - NBT-HU from F30; - NBT CID Screen from F30 or F25; - Touch Controller; OPTIONAL. - Touch ECU; OPTIONAL. - NBT Video Cable; - USB/Aux Port for armrest; - USB cable;
Service menu. This menu can be used to select and adjust settings that are not visible. for the customer. The procedure for starting the Service menu with the "safe grip" has changed compared. to the CCC system: ***8226; Call up Start menu. ***8226; Push controller in up direction for at least 10 s.
You should see if someone makes an iDrive wheel that looks like the wheel from Wheel of Fortune, then you should definitely get that instead. to remove the controller you need to take apart the trim where the controller is mounted to. start from the front, near the cupholders.
Thanks joea9146 your advice on resetting the idrive works. I have a 2006 530i The dealer gave me a hard time about resetting the idrive because the work was not done there. My mechanic, after working on the car, attempted to reset the idrive but had no luck. It took me approximately 30 minutes but it worked. Thanks gelliott
HELP! I Drive failure on my 2007 530xi. so, i have a 2007 530xi. ive had many issues with this car since i bought it in 2009. luckily i had CPO on it and things were covered. My warranty expired end of may 2012. 4 days ago i started my car, the idrive lagged a bit but after 3-4 minutes it came on. 10-15 minutes into me driving the car the
Hi, yesterday I did the ambient light in my car but I did not finished, so to be sure that battery will be okay i disconnected the battery for like 24 hours. Today I finished with everything and i found out that my idrive controller is not working. I checked the fuse 29 was fine, but to be sure i replaced him. It is BMW F10 2010.
. 195 219 60 704 468 884 143 442
bmw e60 idrive controller not working
